Archive

Category Archives for "Reviews"

Review: Senco PC1010 Compressor for Professionals

senco pc1010 review

The Senco PC1010 is a lightweight and portable air compressor which is specifically designed to suit finish and trim jobs and it can also be used across a wide variety of hobbies and crafts.

The machine features a powerful motor and provides a good amount of pressure.

The compressor is extremely versatile and can suit small scale professional work as well as DIY work.

The air compressor is also quiet in operation and requires only a small amount of time to pump up or recover.

In this article, we will take a look at the machine in some detail, considering the features and the specifications of the compressor. The pros and cons of the pancake air compressor will also be considered arriving at a conclusion regarding the product, along with a rating.

If you want to look the price -> Click Here!

 

Features of Senco Air Compressor PC1010

button 3

Small but Powerful

The Senco PC1010 features a powerful motor, which is rated at 0.5 HP while running and 1 HP at peak. The motor is oil free and requires no maintenance. The compressor can output a maximum of 120 PSI.

 

button 3

Easy Operation

The Senco Air Compressor PC1010 is extremely easy to operate and features a coupler, which can help in quick disconnection. There are a number of gauges provided which indicate the tank pressure and the regulated pressure of the machine.

The pancake air compressor also features a handy thermal overload and a reset switch and makes use of a number of valves that protect the device and allow for easy drainage of air. There is also a ventilation opening, which is protected by a shroud.

 

button 3

High Efficiency

Compressor has a very low pump up time of a little over 2 minutes and has a recovery time of only 35 seconds, allowing for maximum usage and minimum downtime.

 

 

Specifications of Senco Air Compressor PC1010

button 3

Portability and Weight

The pancake compressor is extremely portable and only weighs 20 pounds. This makes it easy to carry around as well as store the machine.

 

button 3

Size

The senco pc1010 measures 14 by 13 by 10 inches.

 

button 3

Rating

The air compressor is meant to be used as a stationary and corded electronic device, operated at 115V. The motor is rated at 1 HP, operating at peak load.

 

button 3

Special Features

The Senco PC1010 is capable of delivering in between 20 to 44 drives within a minute. The compressor also features a rubber base which prevents any scratching when using the pancake compressor.

 

 

Pros and Cons

Pros

button-2Extremely easy to operate.

button-2Compact and portable.

button-2Very quiet in operation.

button-2Very efficient for small scale jobs.

button-2Very quick recovery and very low pump up time.

button-2Great customer support service.

 

Cons

button 1Only suitable for small scale jobs.

button 1Durability of the unit may prove to be an issue after a year or two of usage.

button 1There may be a problem with rust as the body of the unit is not made out of aluminum.

button 1There may be leakage if the unit is improperly assembled.

 

Senco is a well-established and reputed brand which has been around for over 70 years providing products. As an air compressor, the Senco Air Compressor PC1010 is quite a popular air compressor all over the world.

While most users are pleased with their purchase, this compressor can only handle small to moderately sized jobs.

The Senco Air Compressor is quite efficient in operation and there is very little downtime associated. However, the durability of the machine is questionable, if the air compressor is subject to heavy usage.

After taking all of these points into consideration, the Senco PC1010 can be said to be a good quality air compressor for small jobs such as renovations and maintenance work in the house.

However, the air compressor does suffer from a few drawbacks and as such, we give it a 3 and a half star rating as an air compressor.

If you want to look the price -> Click Here!

Review Hitachi NV90AG 3.5-Inch Pneumatic Coil Framing Nailer

hitachi nv90ag review

The new Hitachi NV90AG is a lightweight, rather small coiled framing nailer from Hitachi.

This tool has proven great at driving nails to any type of wood, including harder essence wood which makes it great for both DIYers and professional contractors.

The tool is also small enough to get into smaller places like corners and such.

If you like to see the price -> Click Here!

 

Features of Hitachi NV90AG

button 3Product Dimensions: The Hitachi NV90AG is rather small with standard sizes of 15.6 x 6 x 14.8 in. and a total weight of 7.9 pounds. Although not the smallest or lightest nailer on the market it still is pretty close to that.

button 3Type of Nails: It works with nails from 1 ¾ in. to 3 ½ in making it suitable for an all types of projects, and any type of wood.

button 3Drive Depth Adjustment: It comes with a dial making it very easy to adjust settings without any need for additional tools.

button 3Selective Actuation Switch: This allows the user to easily switch between contact and sequential nailing, meaning that you can go on with your project without having to stop and adjust from rapid fire to precision firing.

button 3Open Nose Design: What this feature means is that the jammed nails can easily be removed without having to take the entire tool apart. This in turn translates to less downtime and higher efficiency.

button 3Magazine: It comes with two magazine loading options, side loading and top loading. It also feature a tilt bottom feature ensuring even faster reloads.

button 3Warranty: The best framing nailer comes by default with a 5 year guaranty which says quite a lot about the trust the manufacture has in this product.

 

Pros

button-2Lightweight and Compact: Due to its overall size the Hitachi nailer was very easy to use and didn’t put quite very little stress on the hand an arm. This meant longer working periods without fatigue and need for breaks.

button-2Package: The Hitachi NV90AG package comes with safety glasses which are always nice to have around and although any professional contractor has a pair, DIYers might not.

button-2Jamming: Although the framing nailer has no jammed even after more than a thousand consecutive shots, Hitachi has added a great method of taking care of jammed nails without any hassle.

button-2Professional: Hitachi boasts with building this framing nailer based on contractor needs and that’s actually visible if you look close enough. The finish is great, it has a guard and it’s designed to minimize downtime.

button-2Versatility: First of all it works with a really big range of nails which makes it very useful in any sort of project. It also works on all types of wood, including the harder ones without destroying the surface.

 

Cons

button 1Ease of Use: Although this is a very good tool, high performance it is dedicated to professional contractor. New users or DIYers who have only dealt with non-professional nailers might have a tough time figuring out how it works in the beginning.

button 1Support: Support for various inquiries is not very easy to find for this tool, either online or in the manual it comes with.

button 1Hanger: The Hitachi NV90AG package does not come with a hanger by default and buying one is required. Also the tool needs quite a big hanger which might be an issue in some cases.

 

The Hitachi NV90AG is without doubt a very good, professional tools which can get any job done.

It is basically the only tool for driving nails any contractor would need and can be used both in fast work and precision nailing. It also ensures little to no splintering when used on harder woods which makes it perfect for delicate work on more expensive wood.

If you like to see the price -> Click Here!

Review Paslode 902600 CF325Li Lithium Ion Cordless Framing Nailer

paslode 902600 cf325li review

Nothing can beat the portability and ease of a cordless framing nailer. There is no need for the hoses and compressor to get the job done.

The Paslode CF325LI is one of the top Lithium-Ion cordless framing nailer in the market.

This post of all its features, pros and cons in detail.

If you like to see the price -> Click Here!

 

Features of Paslode CF325LI

button 3Product Dimensions: The Paslode nailer measures 13.5 x 4.5 x 14.5 inches and weighs around 7.5 pounds, which is quite lighter as compared to the pneumatic models.

button 3Power Source: It is powered by rechargeable Lithium ion battery which comes along with the framing nailer. The battery can be fully charged in one hour, and one fully charged battery can supply 6000 shots.

button 3Drive Depth Adjustment Facility: The drive depth adjustment facility is provided on the fly for this nailer making it easy to adjust how deep the nail goes.

button 3Type of Nails: It can accept fasteners from 2 to 3-1/4 in the strip form.

button 3Orange Color: It comes in bright orange color, which is not only appealing to the eyes, but also great for job-site visibility.

button 3Case: It comes with a case, which has neat compartments for everything including charger, nail gun, battery, allen key, spare battery etc.

button 3Warranty: The CF325LI comes with a full coverage warranty of one year.

 

Pros

button-2Lightweight and Cordless: As advertised, Paslode CF325LI is quite portable. It is good to be free from the need of carrying compressor everywhere. And because of its light weight, it can be used for longer duration without any discomfort of arms and shoulders.

button-2More Battery Life: As compared to the older Ni-Cad battery, Lithium ion battery drives more nails. It gets fully charged in only one hour. Moreover, two minutes of charging is sufficient for around 200 nails.

button-2Lockable Battery Position: The nail gun comes with an option of locking the battery in the standby position. This saves the charge of the battery, and also keeps the battery dust-free and safe inside the gun only.

button-2Ease of Depth Change: The process for changing the depth is quite simple for Paslode 902600. There is a depth adjustment dial provided on the fly itself which makes it convenient for the users.

button-2Durable: The gun is not only lightweight, but is also durable. With its sturdy nose design, it is perfect for all kinds of outdoor or indoor jobs.

button-2Precision Without Jam: It works well without any misfire or jams.

 

button-2Easy to Load Magazine: The magazine is quite smooth and the nails can be loaded in the magazine easily.

button-2Case: It comes with one of best kind of case. The case has compartment for everything from battery to charger and even safety goggles. There is no chance of losing the item by keeping it here and there.

 

Cons

button 1Depth setting is needed too many times for different kind of material: Although depth setting is provided on the fly and works perfectly well, there will be a need to set up the depth separately for different material which makes it a time consuming job.

button 1Too noisy: It makes too much noise while operating. Ear buds are necessary while operating this.

button 1Difficult precise shot: Due to the large size of the nose the Paslode CF325LI is a bit difficult to use when trying get a precise shot. More than that, it takes some practice, especially in case of toenailing.

 

Many a times, the framing nailer is needed at a place where the power is not consistent or sometimes, it is just difficult to carry the compressor along for nailing.

The Paslode CF325LI is a perfect choice for those occasion. It is portable, easy to use and efficient.

If you like to see the price -> Click Here!

Review Hitachi NT65MA4 15-Gauge Angle Finish Nailer

hitachi-nt65ma4-review

The Hitachi NT65MA4 is a nailer that does all the work for you. It has a tool-less easy-to-clear nose for quick nail extraction in case of a nail jam and a selective actuation switch that allows for either sequential or contact nailing with the easy flip of a switch.

The rubber grip adds comfort while you work, plus its exhaust portal directs pesky air exhaust away from you.

The selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch. Its 360-degree, fully adjustable exhaust portal direct air exhausts away from you, plus its compact size minimizes fatigue while increasing maneuverability.

The removable no-mar tip protects the work surface from damage while the rubber grip adds comfort. It accepts 15-gauge nails from 1-1/4 long to 2-1/2 long.

Here, we will Hitachi NT65MA4 review some of the features that come with this finish nailer and also some of its specifications before we move on to the pros and cons of this finish nailer and finally the conclusion with the rating for this finish nailer.

If you like to see the price -> Click Here!

 

Features of Hitachi NT65MA4

button 3Durable: This finish nailer is lightweight with aluminum housing that prevents rusting. This nailer is highly durable and comes with a 5 years warranty to assure you of its durability.

button 3Adjustable Exhaust: It has a 360 degrees fully adjustable exhaust that can be directed away from the user. This is done to ensure that air exhaust, debris and oil are avoided.

button 3Portability: The finish nailer is portable because it is not large in size and it is not dependent on a permanent power source or anything that limits its portability. It weighs 4.2 pounds only and thus it is easier to carry around.

button 3Ease of Use: This finish nailer is easy to use and it also comes with an owner’s manual for recommended use and maintenances. The handles also make it easier to use as the owner does not strain when using the nailer easing fatigue.

button 3Lightweight: This finish nailer is extremely light and this reduces fatigue when working. It weighs in at 4.2 pounds making it even easier to maneuver around with.

button 3Size: This finish nailer measures 13.6 x 3.2 x 12 inches.

button 3Rating and Capacity: This Hitachi NT65MA4 has a capacity of driving in more than 1000 nails before any maintenance is checked. It is air powered thus making it simple to move with. It is meant to be a portable nailer.

button 3Special Features: It has selective actuation which allows for either sequential or contact fastening with no additional tools required. It also has an air duster. This allows air from the compressor to bypass the nailing function and expel from a hole in the front of the tool. The user can clear away debris and dust from the work surface in preparation for nailing or gluing or just do clean up; saving time and energy.

 

Pros

button-2It is light and thus portable and easier to use.

 

button-2Comes with standard five-year Hitachi warranty.

 

button-2It includes rugged plastic carrying case, safety glasses, air fitting, and no-mar tip.

 

button-2Compact size minimizes user fatigue, while increasing maneuverability.

 

button-2Rubber grip adds comfort and a secure hold.

 

Cons

button 1Not suitable for small scale jobs.

 

button 1Requires regular maintenance and checking to avoid future problems.

 

button 1It is costly as compared to other nailers with same capabilities.

 

 

The Hitachi NT65MA4 is a good tool for use by homeowners and carpenters alike. It can be used by a wide variety of people who have the experience or the knowledge on how to do that.

The finish nailer is air powered thus it does not need to be used as a stationery device.

The finish nailer has its own unique quality features and it would get a perfect score if not for its little user problems like jamming nails if you put the ones that are not recommended by the manufacturer.

However this Hitachi NT65MA4 has a rating of four and a half stars among the customers who have reviewed it.

If you like to see the price -> Click Here!

Review BOSTITCH N89C-1 Coil Framing Nailer

bostitch-n89c-1-review

The BOSTITCH N89C-1 coil framing nailer reduces the risk of wrongly firing the nail or a jam. It is tough as well as powerful and runs easily on any pressure limit.

It is compact and most versatile as a nailer. It is constructed in such a way that refilling is not much required.

Think of any job and this nailer uses just the right size of nails with perfect shank thickness. You will never have to complain of a double shot. Recommend it to anyone who is looking for a reliable gun.

The extra trigger would go a long way in converting the gun from a sequential to a single fire gun. Even if you don’t check out on this nailer or let it be without any maintenance, it would stay just fine. Building a livestock barn would be made an easy affair all because of BOSTITCH nailer, the wonder gun.

It would definitely not be a hyperbole to say that it is the best air gun in the world. That’s perhaps the main reason why it has managed four and a half star rating. To have an awesome nail gun experience, nothing can be more ultimate than BOSTITCH N89C-1. The framing nailer deserves the four and half star rating that it has got.

If you like to see the price -> Click Here!

 

Features of BOSTITCH N89C-1

This BOSTITCH N89C-1 includes a pneumatic coil framing nailer with an exhaust that can be adjusted according to your use.

If you want to set the nails to a required depth, there is a pushbutton with a depth guide that can be adjusted as per need. There are brilliant wear guards so that abrasive surfaces do not get damaged.

Specifications: BOSTITCH nailer comes in the size of 18.1 x 16.1 x 6.5 inches. Weight is 9.5 pounds is the net weight of the nailer outside the shipping box.

 

Pros

button-2It is light in weight.

 

button-2Good power for shooting makes it a reliable nailer.

 

button-2The depth adjustment is very easy.

 

button-2The contractor grade is trustworthy.

 

button-2It can hold 300 nails.

 

button-2The rafter hook can be adjusted according to your choice.

 

button-2It comes with a 7 years warranty on the tools and one year on compressor.

 

Cons

button 1You might not be able to nail at steep angles due to two flanges that stick out the sides.

 

button 1It is huge and heavy so nailing close objects is a problem.

 

button 1Teeth are smaller.

 

button 1Rafter hook is made up of plastic, so it does not last for a long time.

 

button 1Coil nails are easily damaged if you don’t handle them well.

 

button 1The nailing tip is very wide and thick.

 

button 1When it is used in fast shooting applications, it fails to set all nails.

 

button 1Rotation in the box is hindered by shorter nail coils.

 

 

BOSTITCH N89C-1 coil framing nailer is designed in such a way that it reflects robustness and power. Whether you are looking for a nailer to frame, apply a sheath, fence or bridge, this nailer is just the perfect for you.

It can even be used for masonry, trusses, pallets and crating or wood along with siding applications. Replace your traditionally powered nails right away and go for the BOSTITCH nailer.

It would surely guarantee you more power and efficiency. It can also take more abuse and insult.

The way the nail is forced out of the gun into your work piece with the help of the piston is simply marvelous. Make sure your hose does not contain too much of humidity.

This could result in poor performance of this otherwise awesome framing nailer. Don’t worry even if you have to shoot thousands of nails in a day. The BOSTITCH N89C-1 would do it for you.

If you like to see the price -> Click Here!

Review Dewalt DCN692M1 20V MAX Brushless Cordless Lithium-Ion Framing Nailer Kit

dewalt-dcn692m1-review-1

The Dewalt DCN692M1 is built with the aim of matching durability with speed and consistency. Its versatility makes it possible for use with various brands of nails, clipped or round head ranging from 30 to 34 degrees.

This framing nailer features a highly efficient brushless motor to guarantee durability.

This nailer is designed and manufactured by Dewalt a leading manufacturer of power tools and home improvement appliances.

This review is aimed at going through the features and specifications of the Dewalt DCN692M1 Nailer Kit, analyzing the advantages and downsides to this appliance and making a decision on the worthiness of this framing nailer kit.

If you like to see the price -> Click Here!

 

Features of the Dewalt DCN692M1

button 3Durability: This nailer kit features a very efficient brushless motor for greater durability. The lithium ion batteries are also very durable and capable of driving approximately 700 nails when on full charge.

button 3Unrivaled Speed and Power: This Dewalt framing nailer features dual speed settings that have been boosted for various nail lengths to be driven in with equivalent pace and power of a pneumatic nailer.

button 3Versatility: This framing nailer is welcome to a diverse nature of nails, clipped or round head, the DCN692M1 ranging from 30-34 degrees, irrespective of brand.

button 3Ease of Use: Despite being slightly heavier that other nailers of its category, the Dewalt DCN692M1 still feels light. This is partly due to its dynamic design that makes this nailer so comfortable on the hand.

button 3Weight and Size: This framing nailer kit weighs approximately 8 pounds. The dimensions of this machine is (L x W x H), 13.2 x 4 x 13.5 inches.

button 3Rating and Capacity: This framing gun is meant to be a stationary device. It is a battery-powered device rated at 20V. It has amperage of 4 Ah.

button 3Accessories: This framing nailer comes with a 20V lithium ion battery pack and a charger that charges exceptionally fast.

button 3Special Features: This nailer features an exceptionally fast charging capability and indicator lights that serve to notify the user of low charge remaining in the batteries or stall. It also features a stall release lever that, whenever there is a driver blade is affected by a stall or nail that jammed, gives the user the opportunity to reset the driver blade.

 

Pros

button-2The products beats most of its contemporaries in its reliability.

 

button-2The Dewalt Framing Nailer does away with the time and cost expended in purchasing compressors and gas cartridges. So this product cuts on unnecessary time and cost.

button-2This framing nailer kit leads with durability even with the trashiest use in the most difficult work conditions. The battery is exceedingly durable and can last for well over a year.

 

Cons

button 1Nails tend to hand in the nozzle of the gun after going in halfway and bending, when used on very hard wood. Removal of such nails involves twisting of the gun raising a likelihood of possible future damage of the gun.

button 1The most common way of resetting this product is by reseating the battery. However, the battery tends to be very difficult to be removed.

button 1The framing nailer kit may tend to freeze up at every 8 – 10th hole.

 

button 1The Dewalt tends to weigh slightly more than the average nailer within its category.

 

 

The Dewalt DCN692M1 nailer kit is well noted for its reliability. The battery-powered nature of this nailer

With this framing nailer you are guaranteed of a machine sure to stand the test of time irrespective of the frequency of the use.

Despite its slightly heavier weight than other nailer guns of this category, this gun deserves a rating of 4 out of 5. A good buy.

If you like to see the price -> Click Here!

Review Numax SFR3490 34-Degree Clipped Head Framing Nailer

numax-sfr3490-review

The Numax SFR3490 framing nailer is a compact machine that is suitable for the daily jobs. This nailer is equipped with many new features and can accompany in the projects.

This cost effective tool provides a reliable speed and good power that can help in framing and fencing. It accompanies in the other difficult tasks as well.

Numax is a big player in the market and it is supplying this nail gun to cut down the amount of efforts. The Numax SFR3490 is one of the most effective products that have its own uniqueness on the global platform. It offers high-class product in a reasonable price.

Apart from the other models of the Nailers, this framing nailer is loaded with extensive working power. This is a handy framing nailer has trigger and finger length adjuster that is combined in a single body.

We will look on the other main things, which will throw light on the other points like features, specifications and consistency. The will consist conclusion and user ratings.

If you like to see the price -> Click Here!

 

Features of Numax SFR3490

button 3Heavy Service: The Numax SFR3490 is equipped with a black oxide magazine that is made up of aluminum. It is helpful in providing long service and adds durability. It is lightweight because it has casted aluminum cylinders. The anti-dry function expels the chances of empty shots. This function enhances it life and the dust cap keeps it safe from the dust particles.

button 3Easy Usage: The framing nailer is very easy to handle because the magazine has a limited capacity. The Single and the consecutive mechanism that is included in the triggers add more easiness and make the nailer to perform smoothly. Apart from this, the flexibility of the job provides a multi angled operation. It has a rubber handle that provides better grip on the tool. With these functions, anyone can make use of Numax SFR3490 for their daily needs.

button 3Durability: The framing nailer is equipped with 2-3-1/2 inch paper collated head and the magnesium used in the making increases the longevity and also increase the reliability of the tool. The magazine of the nailer can be easily loaded and depth adjustments are better. All these standards combine to rise the serving period of the nailer manufactured by Numax.

button 3Size and Weight: As stated the nailer is compact and handy the size is 20 x 6.5 x 14.2 inches. The weight is 10.7 pounds.

button 3Capacity of the Item: The Numax SFR3490 framing nailer requires electricity for its operation.

button 3Special Add Ons: The framing nailer has a compact design and the above-mentioned features make it the best in comparison with the others. The trigger allows quick shots and accurate work without any error.

button 3Accessories: The package has one handle and bare tool. Apart from that, there are no requirements of additional parts.

button 3Other Specifications: Although it looks heavy but the engineering done for, the nailer is superb. The light weighted materials are used even the internal parts are made up of these materials.

 

Pros

button-2Small and powerful machine that can be carried anywhere.

button-2Good usage of latest material that provide long lasting performance.

button-2Can work in multiple areas and is useful for day-to-day operations.

 

Cons

button 1Device requires precautions that are not listed in the manual.

button 1The magazines hold a few numbers of nails.

button 1The user may get hurt while handling the jobs.

 

 

The Numax SFR3490 framing nailer is a great nailer that provides high-end quality and convenience in working.

It is recommended to choose the model for reducing the hammer job. The framing nailer gets four and a half stars.

If you like to see the price -> Click Here!

 

Review MAX SN883RH2 SuperFramer 20-Degree Strip Framing Nailer

max-sn883rh2-review

The MAX SN883RH2 is a unique nailing machine that is quite popular.

It is renowned for its compact and elegant design whose emphasis is comfort and high performance.

The following is a review of the product. In the review, the pros and cons as well as a conclusion about the framing nailer will be brought to light.

If you like to see the price -> Click Here!

 

Features of the MAX SN883RH2

button 3Highly Durable: This MAX SN883RH2 is one of the most durable products that are available on the market today. It competes favorably with some of the best pneumatic products that are present in the industry.

button 3Exceptional: It differs greatly from many nailing machines out there because it comes with a collector of dirt. The cap filter is responsible for collecting dirt that accumulates during any nailing task. Users do not have to worry about maintaining the cap filter because it is maintenance free. It is a very reliable dirt collection feature that can collect dirt whose particle size is in micrometers.

button 3Compact Design: The compactness of the design is often marvelous to observe. This also accounts for the convenience that is associated with using the framing nailer. You can easily select the trigger system depending on the intensity of the nailing task at your disposal.

button 3Easy to Use: Despite having a compact design and many high profile features, the pneumatic nailer is very easy to use. But, you may need a user guide to be in a position to make use of advanced features.

button 3Convenient and Efficient: You cannot talk about a list of convenient and efficient pneumatic machines that are currently on the market without making reference to this framing nailer. It is able to load up to 64 nails and drive them through the user’s working specimens. Users can also conveniently adjust the depth of the nails without even altering the operating pressure. Switching from single to double trigger is possible without the adjustment of the pull trigger.

button 3Multipurpose: The MAX nailer can be used to perform a number of nailing tasks such as siding, sheathing, framing and crating. It works with a high pressure ranging between 70 and 100 psi. The plastic collated nails that it works with must have a size ranging between 2 x 0.113 inches and ¼ x 0.148 inches.

button 3Nail Size and Light Weight: It works with a variety of nails whose size ranges between 2 x 0.113 inch and 0.25 x 0.148. It comes with an overall weight of 7 pounds. Even with this weight, the framing nailer is still able to drive the supported nails into any kind of material.

button 3Operating Pressure: The framing nailer has an operating pressure of 90 psi.

button 3Load Capacity: You can load up to 64 nails into the machine’s loading compartment.

button 3Special Features: The Max superframer SN883RH2 comes with a good number of special features such as the ability to load up to 64 nails and to switch from single to double firing without even altering the trigger. It also comes with a free end cap that does not even have to be maintained for it to be in good shape. This feature collects dirt that collects builds up during nailing tasks.

 

Pros

button-2High speed performance nailer.

button-2Loads up to 64 nails.

button-2Switches from single to double trigger quickly and easily.

 

Cons

button 1Maximum operating pressure is 100 psi.

button 1Nail sizes outside specific range cannot be used.

 

 

The MAX SN883RH2 is a highly efficient nailing machine that has continued to be popular. Most users are carried away by the machine’s ability to load more than 60 nails and to switch from single to double firing without altering the trigger.

A good number of users are also carried away by the machine’s ability to collect dirt using its free end collecting cap.

The speed, efficiency and presence of many safety features also account for the machine’s popularity. Undoubtedly, a 5 star rating befits this framing nailer.

If you like to see the price -> Click Here!

Review Hitachi NR90AE Framing Nailer

hitachi-nr90ae-review

This product is not available right now, please check other nailers-> click here

The Hitachi NR90AE framing nailer has impressed users with its light weight and excellent performance.

Hitachi is a well-known name in the power tool technology. They are well-known for their innovative and excellent product and Hitachi NR90AE is no different.

Here is a detailed review which analyzes various pros and cons of Hitachi Full-Head Framing Strip.

If you like to see the price -> Click Here!

 

Features of Hitachi NR90AE

button 3Product Dimensions: The Hitachi NR90AE(s) is 20.8 x 4.9 x 7.5 inches and weighs of 7.5 pounds, which makes it easy to use for the long duration without any discomfort.

button 3Power Source: It’s an air powered plastic collator with the operating pressure of 70 to 120 PSI.

button 3Hardened Claw Tip: It comes with hardened claw tip to protect the nose from regular wear and tear and avoiding slippage during the toe-nailing.

button 3Tool-less Depth Adjustment: There is no need for any extra tool or changes in compressor pressure for adjusting the depth during usage.

button 3Non-slip Elastomer Grip Trigger: It comes with a non-slip grip that makes it easier to hold the machine for longer period of time.

button 3Sequential and Contact Nailing: It can be used for both single and rapid firing, either of which can be selected using an actuator switch.

button 3The High Carbon Steel Toenail: The carbon steel toenail is provided to ensure better and efficient nailing without much wear and tear.

button 3Type of Nails: It accepts plastic collated nail of 2” to 3-1/2” strips of 21 degree only, which are the most commonly used nails. The magazine capacity is 64-70 nails.

button 35-year Limited Warranty: It comes with 5 year limited warranty by Hitachi.

 

Pros

button-2Light Weight: As already publicized by the company, the framing nailer is quite easy on the user, especially for the longer duration jobs. At only 7.5 pounds, it is also comfortable for the overhead nailing work and can be easily maneuvered.

button-2Comfortable Grip: Anyone who has held a nailer for a long time understands the importance of a good grip. With its non-slip elastomer grip, it proved itself to give a perfect feel when held in the hand.

button-2Durable: The Hitachi NR90AE is really durable. Because of its replaceable magazine, in case it drops, the cost of repairs and maintenance will be considerably low.

button-2Ease of Operation: The Hitachi is quite easy to operate. There is a depth adjustment dial just near the trigger button, which allows the user to drive the nail either flush or counterdrive without changing the pressure on the compressor. No tools are needed for this operation.

button-2Dual Operation Modes: It comes with the dual operation mode of single fire and sequential firing of the nails. A simple actuation switch is provided to change the settings from one mode to another making the job less time-consuming.

button-2Precision and Accuracy: It didn’t miss even a single nail for me, neither there was any jam. With its 21 degree angled nail, it worked precisely as intended.

 

Cons

button 1Some Instances of Jamming: Although I didn’t face this, there have been complaints about the nailer jamming in hot climate. It could have been because of insufficient lubrication, but one can never be too sure.

button 1No Rafter Hook and Case: Rafter hook and case might not be needed for the performance of the nailer in the field, but their presence would have been a great help in protecting the finish of the nailer.

button 1Necessity of Safety Glasses: Like all the other plastic collated framing nailer, the user needs to be careful about the plastic pieces flying around during nailing. A pair of safety glasses is necessary for using it.

 

Overall, Hitachi NR90AE is suitable for both professional contractors and the DIY enthusiasts. It is a best framing nailer with the best features and equally competitive cost.

If you like to see the price -> Click Here!

Review Hitachi NR90AD(S) 3-1/2-Inch Clipped Head Framing Strip Nailer

hitachi-nr90ads-1 review

The Hitachi NR90AD(S) is smaller in comparison of any other nailer. It works faster and has more stylish appeal. It can help you in the best possible way in your household framing jobs.

It has a very helpful flip fire switch which gives you the option to choose your fire modes that depends on how do you want it to work, sequential or bump fire mode.

This Hitachi nailer is tool free and very easy to adjust which helps in more productivity. This tool from Hitachi offers variety of applications, including woodwork and metal work. Also, on concrete, drilling and fastening this tool is very helpful.

It comes with 5 years warranty, and its pistons and o-rings associated with this tools cover 90 days of warranty. It is 21 degree plastic collated round head.

Now, we will discuss in details for Hitachi NR90AD(S) about its special and unique features and other claimed specifications. We will also review its pros and cons that come with this framing nailer.

If you like to see the price -> Click Here!

 

Features of Hitachi NR90AD(S)

button 3Weight: It’s only 7 pounds in weight and this quality make it very easy to work with. You can easily rely on nailer for a long day of nailing because of its less weight. Handling it in awkward angles is not tough at all with its light weight.

button 3Tool-Less: It doesn’t have any tools to fix or arrange it, which automatically saves a-lot of time and we can invest that time in our productivity of work. It also becomes less harass tool to work with as you don’t have to fix anything in it before using it.

button 3One Step Nail Loading: This Hitachi NR90AD(S) feature makes it easier to work with because this saves energy and time. It has only one step for nail loading, and then we are all ready to use this as a nailer. Only because of one step nail loading process it has fewer chances to harm you. Otherwise you may get hurt with more action of nail loading process.

button 3Vibration Pads: The framing nailer has good vibration isolation pads, which extends its tool life. And also, if your tools don’t vibrate much then it is definitely easiest to work with. You can easily command a good hold on this tool so that your aim doesn’t get affected, and its comfortable vibration pads make it possible.

button 3Long Time Warranty: Hitachi always offers their product with long time warranty, and they are again offering it here also. It comes with 5 years long warranty. And, that is good enough for any kind of tool. This warranty period ensure us about this high quality of tool.

button 3Durability: The framing nailer has 2-piece anodized aluminium design for maximum durability. And, it is an improved version by Hitachi. It is highly durable with no such maintenance.

 

Pros

button-2Easy Switching Tiger (From auto to semi-auto).

button-2Fits into small areas and feel comfortable to use.

button-2Very easy to use for depth adjustments.

button-2Light in weight.

button-2Easy to use.

 

Cons

button 1Underpowered.

button 1Exhaust is nonadjustable.

button 126 degree nails are little hard to find and it is usually more expensive.

 

 

You can use Hitachi NR90AD(S) all day long without getting any issue regarding its weight. You can use it for clipped nails, round head nails and offset nails it works great.

The framing nailer is very easy to control the depth for any project you are working on. It provides very nice and fine touch.

Ultimately it will look like it’s been done by any professional.

Hitachi has invented best framing gun ever, buy framing nailer. Just missing the half star for a perfect rating, it gets four and a half stars.

If you like to see the price -> Click Here!