Review Paslode 501000 F-350S PowerMaster Plus Pneumatic Framing Nailer
The Paslode 501000 F-350S is one of the lightest and the most sought after pneumatic nail gun in the market.
It is capable of driving the nails through engineered lumbers as well, making it a good option for framing and sheathing fence to the building.
Here is the Paslode 501000 F-350S Powermaster plus pneumatic framing nailer review of all its features, pros, and cons in detail.
If you like to see the price -> Click Here!
Features of Paslode 501000 F-350S
Product Dimensions: The Paslode nailer measures 5.5 x 20.5 x 18.8 inches and weighs around 8.4 pounds. It’s light weight has made it a favorite of many users.
Sequential or Manual Operation: The framing nailer comes with the option of going for both sequential and manual operation, making the job of the user quite easier.
The Depth of Drive Adjustment On the Tool: It comes with on tool depth of drive adjustment dial, which makes adjusting the depth a breeze.
Designed for All Weather Use: The anti-skid rubber grip ensures easy and comfortable hold, and the steel guard provides the sturdy design.
Sequential and Bump Firing: It is easy to switch between the single and sequential firing depending on the need of the user.
Type of Nails: It can drive 2 to 3-1/2 30-degree clipped and full-head paper tape nails .113 .131 diameters in engineered lumber. Its magazine can hold up to two strips of 84 nails.
Rafter: A rafter is provided along with the framing nailer to hang the gun during breaks.
Warranty: The nailer comes with a 90-day limited warranty on wear parts, a six-month limited warranty on magazine parts, and a one-year limited warranty on housing and cap parts.

Pros
Powerful yet lightweight: It is a powerful framing nailer which is quite light in weight. It is also easily maneuverable for the hard to nail areas.
Two type of trigger assemblies: It allows quick transition between both single and sequential firing that saves the user from hassle.
Very low recoil: It is designed in a way that center of gravity is close to the trigger. This provides for a low recoil and balanced usage.
Ease of Depth Change: Depth of the drive can be adjusted using the dial provided depending on the tool itself. There is no need to change the compressor pressure for the depth change.
Easy to load magazine: It not only holds two strips of 84 nails but it is quite simple to load the nails in the magazine. The whole process is less cumbersome as compared to the other models in the market.
Precision without jam: The Paslode works well without any misfire or jams.
Easily reach tight spaces: With its 30-degree nails and compact size, it is suitable for even nailing of tight spots.
Rafter hook: It comes with a rafter hook which the life of the user simple by allowing them to hang the nail gun anywhere between the breaks.
Cons
Depth Setting takes too much time, and adjustments: Although the dial provided for depth adjustment is a plus, it takes too much of time to fine-tune it for the perfect depth. This is a long process which calls for a lot of patience on user’s part.
Minimum eight nails required in the magazine: Not a disadvantage as such, but the Paslode 501000 needs at least eight nails to work. So, if there are only a few nails left in the magazine, it needs a refill of nails to work properly. It is not a big deal but then can take some getting used to.
If you like to see the price -> Click Here!